All entries for roberto guzman de villoria

• Print This Page
• Download as PDF

Growth of Vertically Aligned Carbon Nanotubes on a Continuously Moving Substrate

• Authors: R. Guzman de Villoria, S.L. Figueredo, A.J. Hart, S.A. Steiner III, A.H. Slocum, B.L. Wardle
• Sponsorship: NECST Consortium, NSF

Vertically-aligned carbon nanotube (CNT) arrays are grown on a moving substrate, demonstrating continuous growth of nanoscale materials with long-range order. A cold-wall chamber with an oscillating moving platform (see Figure 1) is used to locally heat a silicon growth substrate coated with a Fe/Al2O3 catalyst film for CNT growth via chemical vapor deposition.  The reactant gases are introduced over the substrate through a directed nozzle to attain high-yield CNT growth ^[1] .  Aligned multi-wall carbon nanotube (MWNT) arrays (or “forests”) with heights of ≈1 mm are achieved at substrate speeds up to 2.4 mm/s. Arrays grown on moving substrates at different velocities are studied to identify potential physical limitations of repeatable and fast growth on a continuous basis. No significant differences are noted between static and moving growth as characterized by SEM (as in Figure 2) and Raman spectroscopy, although overall growth height is marginally reduced at the highest substrate velocity. CNT arrays produced on moving substrates are also found to be comparable to those produced through well-characterized batch processes consistent with a base-growth mechanism. Growth parameters required for the moving furnace are found to differ only slightly from those used in a comparable batch process; thermal uniformity appears to be the critical parameter for achieving large-area uniform array growth.

Once the parameters have been optimized, a desktop continuous will growth apparatus has been designed and implemented to grow VACNTs on silicon wafers (Figure 2), flexible sheets, and alumina fibers continuously. We have demonstrated and reported the ability to manufacture VACNT arrays in a continuous manner, significantly reducing the time spent, energy consumed, and reaction products created as compared to batch processing of these technologicallyvaluable assemblies of nanoscale materials ^[2] .



Figure 1: Moving stage system where an Fe/Al2O3-deposited silicon wafer substrate is driven by an external motor through the growth zone that is composed of two heaters (red) in a “toaster” configuration.



Figure 2: Detail of VACNT forest growth on a silicon wafer.




1. R. Guzman de Villoria, S.L. Figueredo, A. J. Hart, S. A. Steiner III, A.H. Slocum, and B.L. Wardle, “High-yield growth of vertically aligned carbon nanotubes on a continuously moving substrate, “Nanotechnology, vol. 20, no. 40, pp. 405611-405618, 2009. [↩]
2. R. Guzman de Villoria, A. J. Hart, and B.L. Wardle, “Continuous high-yield production of vertically aligned carbon nanotubes on 2D and 3D substrates,” ACS Nano, vol.5, no.6, pp. 4850–4857, 2011. [↩]

Preventing Catastrophic Failures: Nano-engineered Multi-physics Structural Damage Detection

• Authors: R. Guzman de Villoria, N. Yamamoto, A. Miravete, B.L. Wardle
• Sponsorship: NECST Consortium, AFOSR

Catastrophic structural failures cause many physical and personal losses, with prevention estimated at billions of dollars in savings each year. Non-destructive evaluation (NDE) techniques have been pursued and employed for damage detection of such structures to detect cracks and other damage at pre-critical levels for remediation ^{[1] [2]} . Here, a novel multi-physics approach is reported that addresses drawbacks in existing techniques by taking advantage of the effects that damage, such as a crack, has on the electric and thermal transport in a material containing a CNT network distributed in the bulk material. When a potential is applied to a nano-engineered structure(see Figure 1), electric field lines concentrate in the vicinity of cracks as electrons flow around damage, causing field concentrations and “hot spots” via Joule heating, an effect which is amplified because the heat flow is also impeded in areas of damage (e.g., across a crackface). These changes of temperature can be localized through a conventional infrared thermal camera. Low power operation (a 9V standard battery is exemplary, providing a 15C rise at 1 Watt as in Figure 2) and high spatial resolution are demonstrated that are beyond state-of-the-art levels in non-destructive evaluation.

Multiple applications have been identified using this technique such as crack detection in composite components that are joined by metallic fasteners, structures having internal nonvisible damage due to impact, and in situprogressive damage monitoring during a tensile strength test.  The thermal nano-engineered NDE technique demonstrated here can provide a new and effective inspection route for monitoring the nextgenerations of safer infrastructure ^{[3] [4]} .



Figure 1: Nano-engineered material and its components. Aligned carbon nanotubes grown directly on the surface of an alumina fiber cloth.



Figure 2: Damage inspection of a model bolt-hole composite joint. Voltage (0.16 and 12.3 V) was applied directly through hand-held probes to induce heating.




1. D. Barber, S. Wicks, A. Raghavan, C.T.Dunn, S.S. Kessler, and B.L. Wardle, “Health monitoring of aligned carbon nanotube (CNT) enhanced composites,” presented at 2009 SAMPE Fall Technical Conference, Wichita, KS, 2009. [↩]
2. S. Wicks, A. Raghavan, R. Guzman de Villoria, S.S. Kessler, and B.L. Wardle, “Tomographic electrical resistance-based damage sensing in nano-engineered composite structures,” presented at 51st AIAA Structures, Structural Dynamics, and Materials Conference, Orlando, FL, 2010. [↩]
3. R. Guzman de Villoria, N. Yamamoto, A. Miravete, and B.L. Wardle, “Multi-physics damage sensing in nano-engineered structural Composites,” Nanotechnology, vol. 22, pp. 185502-185508, 2011. [↩]
4. R. Guzman de Villoria, A. Miravete, N. Yamamoto, and B.L. Wardle, “Enhanced thermographicdamage detection enabled by multifunctional nano-engineered composite laminates,” presented at 52^nd AIAA Structures, Structural Dynamics, and Materials Conference, Denver, CO, 2011. [↩]