Lossless Multi-Way Power Combining and Outphasing for Radio-Frequency Power Amplifiers
- Category: Circuits & Systems
- Tags: alexander jurkov, david perreault
Print This Page
Download as PDFFor applications requiring the use of power amplifiers (PAs) operating at high frequencies and power levels, it is often preferable to construct multiple low-power PAs and combine their output powers to form a high-power PA. Moreover, such PAs must often be able to provide dynamic control of their output power over a wide range and maintain high efficiency across their operating range. This research work introduces a new power combining and outphasing system that provides both high efficiency and dynamic output power control [1] . The system combines power from four or more PAs (Figure 1) and overcomes the loss and reactive loading problems of previous outphasing systems [2] [3] [4] . It provides ideally lossless power combining, along with nearly-resistive loading of the individual power amplifiers over a very wide output power range. The theoretical fundamentals underlying the behavior and operation of this new combining system were thoroughly developed. Additionally, a straight-forward combiner design methodology was provided. The prototype design of a 27.12 MHz, four-way power combining and outphasing system was presented and implemented (Figure 2), and its performance was experimentally validated over a 10W-100W (10:1) output power range [5] .
-
- Figure 1: A four-way implementation of the proposed multi-way power combiner with four input-power ports Pin,A-Pin,B and one output-power port Pout. The combiner is realized using only six reactive elements, and thus, it is ideally lossless.
-
- Figure 2: A photograph of the implemented four-way combiner PCB (9.8 cm x 5.6 cm) designed to operate at 27.12 MHz over a 10W – 100W output power range.
- A. S. Jurkov and D. J. Perreault, “Design and control of lossless multi-way power combining and outphasing systems,” Midwest Symposium on Circuits and Systems, pp. 1-4, Aug. 2011. = [↩]
- H. Chireix, “High power outphasing modulation,” Proc, of the IRE, vol. 23, no. 11, pp. 1370-1392, Nov. 1935. [↩]
- F. H. Raab, “Efficiency of outphasing RF power-amplifier systems,” IEEE Transactions on Communications, vol. 33, no. 9, pp. 1094-1099, Oct. 1985. [↩]
- A. Birafane and A. Kouki, “On the linearity and efficiency of outphasing microwave amplifiers,” IEEE Transactions on Microwave Theory and Techniques, vol. 52, no. 7, pp. 1702-1708, July 2004. [↩]
- A. S. Jurkov and D. J. Perreault, “Lossless multi-way power combing and outphasing for high-frequency resonant inverters,” IEEE Transactions on Power Electronics and Motion Control, to be published [↩]