An Ultra-low-voltage Mixed-signal Front-end for a Wearable ECG Monitor
- Category: Circuits & Systems, Medical Electronics
- Tags: anantha chandrakasan, healthcare, marcus yip
Print This Page
Download as PDFCircuits for wearable vital sign monitors have very stringent requirements on power dissipation due to limited energy storage capacity and the need for a long lifetime. Extending the time between battery recharge or replacement requires low-power electronics. We report a micro-watt mixed-signal front-end (MSFE) for ECG monitoring [1] that uses aggressive voltage scaling to maximize power-efficiency and ensure compatibility with low-voltage DSPs [2] . The MSFE shown in Figure 1 rejects 50/60Hz power-line interference (PLI) at the input of the system by using a mixed-signal feedback loop, enabling low-voltage operation by reducing dynamic range requirements. Analog circuits are optimized for ultra-low-voltage, and a SAR ADC with a dual-DAC architecture eliminates the need for a power-hungry ADC buffer. Oversampling and ΔΣ-modulation leveraging integrated digital processing are used to achieve ultra-low-power operation without sacrificing noise performance and dynamic range. Figure 2 shows ECG measurements on a male subject with the MSFE using gel electrodes and unshielded wiring. The PLI is clearly canceled when the PLI filter is enabled. The MSFE was prototyped in a 0.18µm CMOS process and consumes 2.9µW from 0.6V.
-
- Figure 1: System block diagram of the mixed-signal front-end for ECG monitoring including all voltage and current references, and clock generation.
-
- Figure 2: Measured ECG with the PLI notch filter disabled (top) and enabled (bottom).
- M. Yip, J. L. Bohorquez, and A. P. Chandrakasan, “A 0.6V 2.9µW mixed-signal front-end for ECG monitoring,” IEEE Symposium on VLSI Circuits, pp. 66-67, Honolulu, HI, Jun. 2012. [↩]
- J. Kwong and A. P. Chandrakasan, “An energy-efficient biomedical signal processing platform,” IEEE J. Solid-State Circuits, vol. 46, no. 7, pp. 1742-1753, Jul. 2011. [↩]