We have confirmed the following titles to appear in the proceedings
of MARC2008. If there is a problem with a listing, please contact
us!
Session 1: MEMS & BioMEMS |
# |
Presenter |
Title |
| 1.01 |
Bernard Yen |
Fabrication and Testing of a Fully-Integrated Multiwatt uTurboGenerator |
| 1.02 |
Alexis Weber |
MEMS-relay for power applications |
| 1.03 |
Dariusz Golda |
Electromagnetically-driven Meso-scale Nanopositioners |
| 1.04 |
Frances Hill |
Portable Power based on MEMS and Carbon Nanotubes |
| 1.05 |
Jeffrey S. Leib |
Origins and Control of Residual Stress in Thin Metal Films for
MEMS Applications |
| 1.06 |
Wei Mong, Tsang |
Flexible polyimide electrodes for neural simulation of the moth
Manduca |
| 1.07 |
Tanya Cruz Garza |
Single Crystal Silicon as a Macro-World Structural Material:
Design of compact, lightweight high pressure vessels |
| 1.08 |
Nader Shaar |
Mechanical alignment and latching for assembling 3D MEMS |
| 1.09 |
Sung Jae Kim |
Amplified Electrokinetic Response by Concentration Polarization
near Nanofluidic Channel |
| 1.10 |
Eric Lam |
Preparation of nanosphere films by Inkjet Printing and post-treatments |
| 1.11 |
Melissa Read |
Design and Fabrication of Standard Coupons for the Testing of
MEMS Scale Electrical Contacts |
| 1.12 |
Kristofor Payer |
Fabrication of an Integrated System for Biomolecular Concentration
and Detection |
| 1.13 |
Salil Desai |
A Photopatternable Silicone for BioMEMS Applications |
| 1.14 |
Joseph Kovac |
Intuitive, Image-Based Sorting of Mammalian Cells Using OPTO-FLUCS
(OPTO-FLUidic Cell Sorting) |
| 1.15 |
Hongshen Ma |
Towards a Microfabricated Wet-Calibration-Free Permittivity and
Conductivity Sensor |
| 1.16 |
Kerry Cheung |
Batch Fabricated Linear Quadrupole Mass Filters |
| 1.17 |
Suman Bose |
Microfluidic devices for separation of cells by rolling on patterned
receptors |
| 1.18 |
David Kong |
Integrated gene and protein synthesis in a microfluidic device |
| 1.19 |
Karel Domansky |
Perfused Multiwell Tissue Culture Plates for Development of Drug
and Disease Models |
| 1.20 |
Jeong Hoon Lee |
High-throughput proteomic sample preconcentration and its application |
| 1.21 |
Stephen M. Hou |
Lateral Line Inspired MEMS-Array Pressure Sensing for Passive
Underwater Navigation |
| 1.22 |
Hui Zhou |
Micromechanical actuators for insect flight mechanics |
| 1.23 |
Vicente Fernandez |
Object Discrimination for Application to a MEMS Pressure Sensor
Array |
| 1.24 |
Christopher Rohde |
Microfluidic System for High-Throughput On-Chip Whole-Animal
Screening |
Session 2: Circuits & Systems |
# |
Presenter |
Title |
| 2.01 |
Payam Lajevardi |
Reconfigurable Zero-Crossing Based Analog Circuits |
| 2.02 |
Robert Pilawa-Podgurski |
Multi-stage Converter Architectures for Microprocessor Power Deliv |
| 2.03 |
Matt Straayer |
VCO-based Sigma-Delta A/D Conversion |
| 2.04 |
Sanquan Song |
An Adaptive Fractionally Spaced ZCDB Rx Equalizer |
| 2.05 |
Patrick Mercier |
Fully Integrated Pulsed-UWB Transceivers for Small Lightweight Flying
Vehicles |
| 2.06 |
Vivienne Sze |
Algorithms and Architectures for Ultra-Low-Power Video Compression |
| 2.07 |
Mahmut Ersin Sinangil |
Circuit Design for Highly Energy Constrained Applications |
| 2.08 |
Jose Bohorquez |
An Ultra-Low Power CMOS Transceiver for Medical Implants |
| 2.09 |
Philip Godoy |
Nested Chopper Stabilization in Analog Multipliers and Down-conversion
Mixers |
| 2.10 |
Surapap Rayanakorn |
Wideband Two-point Modulators for Multi-standard Transceivers |
| 2.11 |
Khoa M. Nguyen |
Receivers for Active and Passive Millimeter-Wave Imaging Applications |
| 2.12 |
Yajun Fang |
Obstacle Detections for Intelliget Vehicles |
| 2.13 |
Samuel C. Chang |
Milliwatt Energy Harvesting from Low-Frequency Vibration |
| 2.14 |
Olumuyiwa Ogunnika |
An Integrated Circuit Capable of Rapid Multi-frequency Measurements
and a Reconfigurable Electrode Array for Use in Anisotropic Electrical
Impedance Myography |
| 2.15 |
Daihyun Lim |
Test structures and optimization methodologies for electrical variation
in IC manufacturing |
| 2.16 |
Tongjai Chookajorn |
Void Kinetics in Copper Interconnects |
| 2.17 |
Belal M. Helal |
Low-Jitter MDLL-based Clock Multiplication |
| 2.18 |
Yan Li |
Iterative robust optimization of analog circuits |
Session 3: Photonics |
# |
Presenter |
Title |
| 3.01 |
Xiaochen Sun |
Ge as a gain medium for monolithic laser integration on Si |
| 3.02 |
Juejun Hu |
Low-loss high-index-contrast planar waveguides with graded-index
cladding layers |
| 3.03 |
Vanessa Wood |
All Inorganic Colloidal Quantum Dot LEDs |
| 3.04 |
M. Scott Bradley |
Inkjet-Printed J-Aggregates for Integrated Optical Devices |
| 3.05 |
Ta-Ming Shih |
Photonic Wires using Supercollimation |
| 3.06 |
Natalija Jovanovic |
Advances in Tungsten Photonic Crystals |
| 3.07 |
Satoshi Takahashi |
Non-periodic Photonic Crystals for Programmable Lenses |
| 3.08 |
Lei Zhang |
A Full-Wave Method with Surface Conductive Absorbers for 3D Analysis
of Nanophotonics |
| 3.09 |
Benjamin Moss |
Digital Equalization of the Nonlinear Photonic Modulator Diode |
| 3.10 |
Jonathan Mapel |
High flux gain in luminescent solar concentrators |
| 3.11 |
Jason Orcutt |
Toward Deep-Submicron CMOS Photonics |
| 3.12 |
Kevin Lee |
Waveguide Sensors for Microfluidic Integration |
Session 4: Electronic Devices & Emerging Technologies |
# |
Presenter |
Title |
| 4.01 |
Leonardo Gomez |
High Hole Mobility Strained-Si/Strained-Ge Heterostructures on
Insulator |
| 4.02 |
Pouya Hashemi |
Suspended Strained-Si Nanowires on Insulator for High-mobility
Gate-All-Around Field Effect Transistors |
| 4.03 |
Nicole DiLello |
Electrical and Optical Characteristics of Ge-on-Si LPCVD grown
Photodiodes |
| 4.04 |
Jae-kyu Lee |
Low temperature NiSi -gate, -source/drain Si/SiGe heterostructure
MOSFETs |
| 4.05 |
John Hennessy |
ALD Gate Dielectrics for High-Mobility Materials |
| 4.06 |
Niamh Waldron |
A 90 nm self-aligned InGaAs HEMT for future logic applications |
| 4.07 |
Jungwoo Joh |
Degradation mechanisms in GaN High Electron Mobility Transistors |
| 4.08 |
Jinwook Chung |
Estimation of Trap Density in AlGaN/GaN HEMTs from Subthreshold
Slope Study |
| 4.09 |
Xu Zhao |
Atomic Layer Etching of AlGaN/GaN structures |
| 4.10 |
David He |
Device Characterization and Circuit Design for Organic and ZnO
Thin-Film Transistors |
| 4.11 |
Hayden Taylor |
Computationally efficient modeling of pattern dependencies in
the micro-embossing of thermoplastic polymers |
Session 5: Molecular & Nanotechnology |
# |
Presenter |
Title |
| 5.01 |
HsinYu Tsai |
Overcoming the far-field diffraction limit via Absorbance-Modulation
Imaging |
| 5.02 |
Joel K. Yang |
Sub-10-nm Lithography with High-contrast Salty Development of
Hydrogen Silsesquioxane |
| 5.03 |
Gilbert D. Nessim |
Carbon nanotubes for I.C. interconnects |
| 5.04 |
Jihun Oh |
Fabrication of through-hole nanoporous alumina scaffold for growth
of CNTs |
| 5.05 |
Tan Mau Wu |
Carbon nanotube applications for electronic interconnects |
| 5.06 |
Mario Hofmann |
In-situ sample rotation as a tool to understand nanotube growth |
| 5.07 |
Namiko Yamamoto |
Multi-funrcional properties of nano-engineered composites reinforced
with carbon nanotubes |
| 5.08 |
Mihail Bora |
Exciton-Coupled Surface Plasmon Resonance Biosensor |
| 5.09 |
Polina Anikeeva |
Electronic and Excitonic Processes in Quantum Dot LEDs |
| 5.11 |
Hyun Jin In |
Nanostructured membrane alignment by magnetic fields |
| 5.13 |
Pan Mao |
High-throughput anisotropic nanofluidic filters for biomolecule
separation |
| 5.15 |
Suman Bose |
Microfluidic synthesis of polymeric nanoparticles |
| 5.16 |
Paul Tierney |
New Metrology Capabilities in the MTL Fabs |
