Session
1: Electronics & Quantum Devices |
No. |
Title |
Author |
1.01 |
Transient Thermal Dynamics of Gallium Nitride HEMTs |
Kevin Bagnall |
1.02 |
GaN HEMTs with Diamond Back-barries and Cap-layers |
Yuhao Zhang |
1.03 |
Vertical Graphene-on-GaN Hot Electron Transistor |
Ahmad Zubair |
1.04 |
Gate stack degradation of InAlN/GaN HEMTs for RF Applications |
Yufei Wu |
1.05 |
Negative-Bias Temperature Instability in Gallium Nitride Power Field-Effect Transistors |
Alex Guo |
1.06 |
Time-Dependent Dielectric Breakdown in High-Voltage GaN Field-Effect Transistors |
Shireen Warnock |
1.07 |
Effect of Reactive Ion Etching on Regrown Ohmic Contacts in AlGaN/GaN Devices |
Sameer Joglekar |
1.08 |
GaNFET High Voltage Circuit Design using Physical Compact Model |
Ujwal Radhakrishna |
1.09 |
Interface trap assisted parasitic currents in Tunnel Field-Effect transistors |
Redwan Sajjad |
1.10 |
Electrical Stability of InGaAs Quantum-Well MOSFETs |
Xiaowei Cai |
1.11 |
Quantum-size effects in Sub-10 nm InGaAs FinFETs |
Alon Vardy |
1.12 |
Mobility Analysis with FIN Scaling Using Nano Hall Structures |
John Niroula |
1.13 |
InGaAs/GaAsSb with intrinsic tunneling steepness ~50mV/dec |
Tao Yu |
1.14 |
Wide-field Magnetic Field Imaging with Nitrogen Vacancy Centers in Nanodiamonds at High Frame-rates |
Christopher Foy |
1.15 |
High-Voltage Organic Thin Film Transistor |
Andy Shih |
1.16 |
High Performance and Stable Au-free AlGaN/GaN Later Power Diode on 200-mm Silicon Substrate |
Jie Hu |
Session
2: Circuits & Systems |
No. |
Title |
Author |
2.01 |
Impedance Control Network Resonant Step-Down DC-DC Converter Architecture |
Rose Abramson |
2.02 |
A Resonant Receiver with Maximum-Efficiency Tracking for Device-to-Device Wireless Charging |
Nachiket Desai |
2.03 |
FeRAM enabled Cryptographic Wireless Authentication Tags for Supply Chain Integrity |
Chiraag Juvekar |
2.04 |
An Energy-Scalable Co-processor for Blind Image Deblurring |
Priyanka Raina |
2.05 |
Energy-Efficient Reconfigurable Accelerator for Deep Convolutional Neural Networks |
Yu-Hsin Chen |
2.06 |
Low Power Hardware Accelerator for Object Detection with Deformable Parts Model |
Amr Suleiman |
2.07 |
Reconfigurable Low-Power Ultrasound Beamformer ASIC |
Bonnie Lam |
2.08 |
A fast, wideband THz CMOS spectrometer based on an on-chip frequency comb |
Cheng Wang |
2.09 |
A Terahertz On-Chip Noise Source Using Silicon Avalanche Diode |
David Williams |
2.10 |
High-Speed Inter-Chip Interconnects Using Guided THz Wave |
Jack Holloway |
2.11 |
THz Signal Detector Design on III-V/Si Heterogeneous-Integration Platform |
Zhi Hu |
2.12 |
A CMOS Flash ADC for GaN/CMOS Hybrid Continuous-Time Modulator |
Xi Yang |
Session
3: MEMS & NEMS |
No. |
Title |
Author |
3.01 |
Microhydraulic Electrowetting Actuators |
Kevin Meng |
3.02 |
MEMS Energy Harvesting from Low-Frequency, Low-G Vibrations |
Ruize Xu |
3.03 |
Piezoelectric Micro-machined Ultrasonic Transducer Array for Medical Imaging |
Katherine Smyth |
3.04 |
Close-Packed Silicon Microelectrodes for Neural Recording |
Jorg Scholvin |
3.05 |
Scalable Arrays of High-Precision Mechanical Resonators |
Selim Olcum |
3.06 |
Highly Scaled Silicon Field Emitter Arrays |
Mohammad Araghchini |
3.07 |
Tunneling Nanoelectromechanical Switches based on Molecular Thin Films |
Farnaz Niroui |
3.08 |
Electromagnetic Imaging of Nanostructures |
Rakesh Kumar |
3.09 |
Hotspot Cooling via Thin-Film Evaporation |
Solomon Adera |
3.10 |
Electrostatic, Field Emission-Based, Ion Pump architecture for Cold-Atom Interferometry Systems |
Anirban Basu |
3.11 |
A Tabletop Deep Reactive Ion Etching System for MEMS Development and Production |
Parker Gould |
3.12 |
How Long Does it Take to Run a Process? No, Really! |
Jorg Scholvin |
Session 4:
Medical Devices & Biotechnology |
No. |
Title |
Author |
4.01 |
Integration of micro- and nanotechnologies for rapid and cost-effective sensing of the Ebola Virus |
Mario Alvarez |
4.02 |
Thin Flexible and Stretchable Tactile Sensor Based on a Deformable Microwave Transmission |
Matthew D'Asaro |
4.03 |
Development of a Transcranial Doppler Ultrasound System |
Sabino Pietrangelo |
4.04 |
Non-invasive Central Arterial Pressure Waveform Monitoring using Ultrasound |
Joohyun Seo |
4.05 |
A Portable Bioimpedance Spectroscopy Measurement System for Congestive Heart Failure Management |
Maggie Delano |
4.06 |
Magnetothermal Multiplexing for Biological Applications |
Christiansen Michael |
4.07 |
An implantable theragnostic elastic multielectrode array for muscle conditioning and epimysial recording during peripheral nerve repair |
Jonathan Tsosie |
Session 5:
Photonic Devices & Optoelectronics |
No. |
Title |
Author |
5.01 |
Integrated optical addressing of a trapped atomic ion qubit |
Karan Mehta |
5.02 |
An ultra-efficient III-V LED for electroluminescence cooling |
Zheng Li |
5.03 |
Thermally Enhanced Gallium Nitride Based Blue Light-Emitting Diode |
Jin Xue |
5.04 |
Telecommunication Wavelength Polysilicon Photodetector in Zero-change CMOS Platform |
Huaiyu Meng |
5.05 |
Electrical transport across individual grains in organic-inorganic perovskites |
Giovanni Azzellino |
5.06 |
Perovskite Crystals for Tuneable White Light Emission |
Sandeep Pathak |
5.07 |
Architecture for Large-Scale Integration of Graphene Optoelectronic Devices in Photonic Integrated Circuits |
Jordan Goldstein |
5.08 |
Nanoscale Spatial Carrier Density Modulation of 2D Materials for Effective p-n Junction Formation and Tunable Optoelectronic Devices |
Cheng Peng |
5.09 |
Design and Manufacture of Bio-Inspired Light-Emitting Optical Micro-Cavities |
Cecile Chazot |
5.10 |
Transparent light-emitting devices using electric field-induced quenching of quantum dot photoluminescence |
Sihan Xie |
5.11 |
THz dual-comb spectrometer based on quantum cascade laser frequency combs |
Yang Yang |
5.12 |
Integrated on-chip mode-locked lasers made on CMOS-compatible silicon photonics platform |
Katia Shtyrkova |
5.13 |
Solar Water Splitting with Metallic-Semiconductor Photonic Crystals |
Xinhao Li |
5.14 |
Solid-State Infrared-to-Visible Upconversion Sensitized by Colloidal Nanocrystals |
Mengfei Wu |
Session 6:
Nanotechnology |
No. |
Title |
Author |
6.01 |
Development of Nanoporous Graphene Membranes for Gas Separation |
Michael Boutilier |
6.02 |
Electrospray-Printed Graphene Oxide Nanostructured Sub-Atmospheric Ammonia Sensor |
Anthony Taylor |
6.03 |
Molecular Selectivity of Graphene-Enhanced Raman Scattering |
Shengxi Huang |
6.04 |
Flexible Transparent Polymer Solar Cells with All-Graphene Electrodes |
Yi Song |
6.05 |
Folding of Graphene Hinge Structures Dispersed in Solution |
Marek Hempel |
6.06 |
Parallel Stitching of 2-Dimensional Materials for Large-Scale Integrated Circuits |
Cosmi Lin |
6.07 |
MoS2/WSe2 van der Waals heterojunction tunnel-diode |
Amir Nourbakhsh |
6.08 |
Revealing the Angle-Resolved Light-Matter Interaction in Anisotropic Layered Materials |
Xi Ling |
6.09 |
Broadband Light Absorption of Titanium Oxide with Various Metal Reflector for Solar Energy Harvesting |
Sang Hoon Nam |
6.10 |
Fouling and Recovery Kinetics of Underwater Superoleophobic Nanoporous TiO2 Surfaces under UV Light |
Divya Panchanathan |
6.11 |
A Nanofluidic deivce for rapid biologics analysis |
Sung Hee Ko |
6.12 |
Electronic and optoelectronic transport of transitional metal dichalcogenides |
Yafang Yang |
6.13 |
Multilayer Block-Copolymer Meshes by Orthogonal Self-Assembly |
Sam Nicaise |
6.14 |
Conjugation of nanodiamonds and plasmonic nanoparticles for fluorescence enhancement of nitrogen vacancy centers |
Reyu Sakakibara |
6.15 |
Direct-write Assembly of Colloidal Materials |
Alvin Tan |
Session 7:
Materials & Manufacturing |
No. |
Title |
Author |
7.01 |
Repeated Roll-To-Roll Transfer of CVD-Grown Graphene onto Flexible Substrates Using Hot Lamination and Electrochemical Delamination |
Marek Hempel |
7.02 |
3D Printing of Electronic 2D Materials |
Elaine McVay |
7.03 |
Liquid spreading on ceramic-coated carbon nanotube films and patterned microstructures |
Hangbo Zhao |
7.04 |
Influence of density gradients on the thermal conductivity and mechanical compliance of carbon nanotube forests |
Christine Jacob |
7.05 |
Two-Dimensional Molybdenum Disulfide from ALD Molybdenum Oxide |
Brent Keller |
7.06 |
Carbon nanotube microstructures for direct contact printing of electronic inks |
Sanha Kim |
7.07 |
GaAsP top cell for high efficiency Si based dual junction solar |
Rushabh Shah |
7.08 |
III-V and Group IV Materials for Energy-Efficient Optical Links |
Christopher Heidelberger |
7.09 |
Interstitial defects in irradiated germanium |
Corentin Monmeyran |
7.10 |
Metal-assisted chemical etching as a scalable, high-resolution approach for the fabrication of nanoporous silicon |
Brendan Smith |
7.11 |
Using chaotic mixing to create micro- and nanostructures for tissue engineering applications |
Grissel Trujillo de Santiago |
7.12 |
Characterization and Modeling of Pattern Dependencies in Spin-Coating and Electroplating in Advanced Packaging Technology |
Chris Lang |
7.13 |
Harnessing Nature's Light Manipulation Strategies and Advantageous Properties of Soft Matter for Multifunctional Optical Materials |
Mathias Kolle |
Session 8:
Energy |
No. |
Title |
Author |
8.01 |
Vertical GaN Power Transistors on Bulk GaN Substrate |
Min Sun |
8.02 |
High Resolution Temperature Measurement in GaN-based Transistors |
Banafsheh Barabadi |
8.03 |
Toward Flexible Organic-Inorganic Perovskite Solar Cells via Inkjet Printing |
Anna Osherov |
8.04 |
Turning scrap silicon wafers into usable solar-cell material by dissolving precipitated metal impurities |
Hannu Laine |
8.05 |
Enhanced photocurrent in PbS quantum dot photovoltaics utilizing ZnO nanowire arrays and band alignment engineering |
Paul Rekemeyer |
8.06 |
Solar Thermal Fuel Polymers for Solid-State Applications |
David Zhitomirsky |
8.07 |
Towards a High Specific Energy Thermophotovoltaic Microgenerator |
Walker Chan |
8.08 |
Photonic crystals for thermophovoltaics |
Veronika Stelmakh |
8.09 |
Enhanced Flow Boiling in Microchannels via Incorporated Surface Structures |
Yangying Zhu |
8.10 |
Dynamics of Wetting and Wicking |
Dion Antao |