{"id":1194,"date":"2013-07-25T18:27:16","date_gmt":"2013-07-25T18:27:16","guid":{"rendered":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/?p=1194"},"modified":"2013-07-25T18:30:00","modified_gmt":"2013-07-25T18:30:00","slug":"properties-of-polymorphs-of-belite","status":"publish","type":"post","link":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/properties-of-polymorphs-of-belite\/","title":{"rendered":"Properties of Polymorphs of Belite"},"content":{"rendered":"

Portland cement clinker contains four major phases; alite (C3<\/sub>S) is the most dominant (50-70% by mass) and highly reactive with water while belite (C2<\/sub>S) constitutes 15-30% of normal cement clinkers and reacts slowly with water. The production temperature of C2<\/sub>S is lower than that of C3<\/sub>S, making the improvement of the reactivity of C2<\/sub>S phase to increase its use, which could result in lower energy requirements, a long-standing challenge. At ordinary pressures, thermal and X-ray measurements have reported five different polymorphs of belite, including Beta (\u03b2), Gamma (\u03b3), and three Alpha (\u03b1) phases[1<\/a>]<\/sup>. We applied first-principles fully quantum mechanical analytical techniques to model different polymorphs of belite. Combining these techniques with statistical analyses, we predict the energetically most favorable structures of \u03b2 and \u03b3 polymorphs. We calculate the substitution and formation energies for most of the dominant impurities (Al, K, Fe, and Mg) and vacancy defects. We examine how each impurity defect affects the reactivity of the material. By calculating the surface energies for all adatoms<\/i> (atoms adsorbed into the crystal structure) in all polymorphs, we aim to understand how adatoms and defects play a role in determining surface energies and crystal reactivity. The \u03b3-C2<\/sub>S polymorph forms after cooling \u03b2-C2<\/sub>S below 500o<\/sup>C. The calculated cohesive energy of \u03b3-C2<\/sub>S is the highest, establishing the stability of this polymorph. The charge density of \u03b3-C2<\/sub>S in the lowest unoccupied molecular orbitals is lower than that of \u03b2-C2<\/sub>S, which signals lower reactivity. Our initial calculations demonstrate that adatoms influence the reactivity of \u03b3-C2<\/sub>S more than that of \u03b2-C2<\/sub>S. Surface energies shown in Figure 1 for \u03b3-C2<\/sub>S polymorphs are higher than those for \u03b2-C2<\/sub>S. However, after the addition of impurities in our simulations, the calculated surface energies of \u03b3-C2<\/sub>S polymorphs decreased significantly. We concluded that alkali metal impurities cause the low reactivity.<\/p>\n

\"Figure<\/a>

Figure 1: Energetics of Beta and Gamma C2S surfaces. The least energetic surface structures are indicated.<\/p><\/div>\n

  1. H. F. W. Taylor, Cement Chemistry,London, <\/i>Thomas Telford Publishing, 1997. [↩<\/a>]<\/li><\/ol>","protected":false},"excerpt":{"rendered":"

    Portland cement clinker contains four major phases; alite (C3S) is the most dominant (50-70% by mass) and highly reactive with…<\/p>\n","protected":false},"author":370,"featured_media":1195,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6,8,6083],"tags":[12668,12667],"_links":{"self":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/posts\/1194"}],"collection":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/users\/370"}],"replies":[{"embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/comments?post=1194"}],"version-history":[{"count":8,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/posts\/1194\/revisions"}],"predecessor-version":[{"id":2434,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/posts\/1194\/revisions\/2434"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/media\/1195"}],"wp:attachment":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/media?parent=1194"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/categories?post=1194"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2013\/wp-json\/wp\/v2\/tags?post=1194"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}