{"id":5571,"date":"2012-07-18T22:28:05","date_gmt":"2012-07-18T22:28:05","guid":{"rendered":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/?p=5571"},"modified":"2012-07-18T22:28:05","modified_gmt":"2012-07-18T22:28:05","slug":"inasp-graded-buffers-for-thermophotovoltaic-devices","status":"publish","type":"post","link":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/inasp-graded-buffers-for-thermophotovoltaic-devices\/","title":{"rendered":"InAsP Graded Buffers for Thermophotovoltaic Devices"},"content":{"rendered":"
\"Figure<\/a>

Figure 1: The threading dislocation density (TOP) in InAsxP1-x graded buffers does not significantly increase with higher strain gradients. The threading dislocations appear to be highly mobile with a calculated velocity of 40.9 \u03bcm\/s at the growth temperature. This velocity was found by fitting the data with a least-squares regression (the \u201cNo Buffer\u201d sample was not included). Increased strain gradients do cause a marginal increase in the RMS surface roughness (BOTTOM). RMS roughness was calculated from a 25×25 \u03bcm AFM image.<\/p><\/div>\n

Semiconducting alloys of Inx<\/sub>Ga1-x<\/sub>As, GaAsy<\/sub>Sb1-y<\/sub>, and InAsz<\/sub>P1-z<\/sub> can be fabricated to exhibit band gaps between 0.5 and 1.0 eV, which are suitable for thermophotovoltaic (TPV) devices.\u00a0 However, the compositions of interest are not lattice-matched to any of the common III-V compound semiconductor substrates. Direct growth of these alloys on common substrates would result in high threading dislocation densities (TDD) in the active layers. Since TPV devices require long minority carrier lifetimes, the dislocation density needs to be minimized for efficient performance. The objective of our research is to establish robust lattice constant engineering approaches to allow broad tunability of the band gap of TPV devices. We have researched the properties of compositionally graded buffers of InAsz<\/sub>P1-z<\/sub> on InP substrates to provide a platform for high quality thin films of Inx<\/sub>Ga1-x<\/sub>As, GaAsy<\/sub>Sb1-y<\/sub>, and InAsz<\/sub>P1-z<\/sub> alloys over a range of lattice constants and band gaps.<\/p>\n

InAsx<\/sub>P1-x<\/sub> compositionally graded buffers were prepared with metal-organic chemical vapor deposition (MOCVD) system. A set of samples was fabricated to study the TDD evolution as a function of the strain gradient (% strain\/\u00b5m) in the buffer. The samples consisted of graded buffers with strain gradients between 0.33 % strain\/\u03bcm and 1.37 % strain\/\u03bcm and final cap composition of InAs0.4<\/sub>P0.6<\/sub>. One sample included in this set was a layer of InAso.4<\/sub>Po.6<\/sub> grown directly on InP that intentionally lacked a graded buffer. Figure 1 shows the threading dislocation density and surface roughness for this set of samples.\u00a0 Assuming an equilibrium strain relaxation process, we determined the dislocation glide velocity in the InAsx<\/sub>P1-x<\/sub> graded buffers to be 40.9 \u03bcm\/s using a least-square fit of the data.\u00a0 This velocity is relatively high and allows for low dislocation densities for high strain gradients.\u00a0 Although surface roughness increases with strain gradient, the greatest roughness was still suitable for device processing.<\/p>\n","protected":false},"excerpt":{"rendered":"

Semiconducting alloys of InxGa1-xAs, GaAsySb1-y, and InAszP1-z can be fabricated to exhibit band gaps between 0.5 and 1.0 eV, which…<\/p>\n","protected":false},"author":1,"featured_media":5572,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6,8],"tags":[6193,19],"_links":{"self":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/posts\/5571"}],"collection":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/comments?post=5571"}],"version-history":[{"count":3,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/posts\/5571\/revisions"}],"predecessor-version":[{"id":6416,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/posts\/5571\/revisions\/6416"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/media\/5572"}],"wp:attachment":[{"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/media?parent=5571"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/categories?post=5571"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/wp-json\/wp\/v2\/tags?post=5571"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}