{"id":5496,"date":"2012-07-18T22:28:21","date_gmt":"2012-07-18T22:28:21","guid":{"rendered":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/?p=5496"},"modified":"2012-07-18T22:28:21","modified_gmt":"2012-07-18T22:28:21","slug":"thin-film-crystalline-silicon-solar-cells-enabled-by-sub-micrometer-surface-light-trapping-structures","status":"publish","type":"post","link":"https:\/\/mtlsites.mit.edu\/annual_reports\/2012\/thin-film-crystalline-silicon-solar-cells-enabled-by-sub-micrometer-surface-light-trapping-structures\/","title":{"rendered":"Thin-Film Crystalline Silicon Solar Cells Enabled by Sub-micrometer Surface Light-Trapping Structures"},"content":{"rendered":"

The cost of silicon solar cells has fallen precipitously in recent years, primarily as a result of manufacturing improvements, increasing scale, and decreasing profit margin.\u00a0 Further cost reductions will depend upon technical advances that increase cell efficiency and\/or minimize the variable costs associated with module production.\u00a0 One strategy to lower the cost of silicon photovoltaic modules is to dramatically reduce the amount of material required in a cell from the current 180-\u03bcm standard to 10 \u03bcm or less.\u00a0 However, since the absorption length for longer-wavelength photons (red and infrared) is significantly larger than this thickness, thin cells must be designed to trap photons in the absorber layer very effectively to yield competitive efficiencies.\u00a0 Light-trapping in conventional wafer-based photovoltaics is well understood [1<\/a>] <\/sup>, and light-trapping structures are integrated into virtually all commercially available solar cells.\u00a0 However, the physical basis associated with light-trapping in thin-film silicon cells is quite different than that for conventional silicon photovoltaics, both because the thinness of the material physically limits the dimensions of light-trapping features and because light-trapping based on geometric optics is less effective for very thin materials.\u00a0 In this work, simulations based on the transfer matrix method were developed to identify optimal surface structures for light trapping.\u00a0 As shown in Figure 1, a variety of potential geometries offer significant enhancement over a planar silicon surface.\u00a0 Of the structures that are modeled in this work, the one offering the best combination of light-trapping effectiveness and manufacturability is a two-dimensional periodic array of inverted pyramids on a sub-micrometer pitch [2<\/a>] <\/sup> [3<\/a>] <\/sup>, as in Figure 2.\u00a0 Theoretical calculations suggest that a 10 \u03bcm silicon film textured in this way can absorb as effectively as a flat film 300 \u03bcm thick.\u00a0 Demonstration versions on SOI substrates are currently being fabricated in the Microsystems Technology Laboratories at MIT.<\/p>\n\n\t\t