{"id":600,"date":"2010-06-23T15:42:26","date_gmt":"2010-06-23T19:42:26","guid":{"rendered":"https:\/\/wpmu2.mit.local\/?p=600"},"modified":"2010-06-23T15:42:26","modified_gmt":"2010-06-23T19:42:26","slug":"ultra-high-speed-zero-crossing-based-adc","status":"publish","type":"post","link":"https:\/\/wpmu2.mit.local\/ultra-high-speed-zero-crossing-based-adc\/","title":{"rendered":"Ultra-high-speed Zero-Crossing-based ADC"},"content":{"rendered":"
\"Figure<\/a>

Figure 1: One stage of a single slope CBSC based pipelined ADC.<\/p><\/div>\n

With an increasing need for higher data rates, both wireless applications and data links are demanding higher speed analog-to-digital converters (ADC) with medium resolution.\u00a0 In particular, this work investigates ADCs with sampling rate up to 2 Gs\/s with 6-8 bits of resolution.<\/p>\n

Time-interleaved converters achieve their high sampling rate by placing several converters in parallel.\u00a0 Each individual converter, or channel, operates at a reduced sampling rate and is responsible for digitizing a different time slice.\u00a0 This method requires matching of the individual converters, which make up the parallel combination. Therefore channel-matching is an important design consideration for time-interleaved ADCs.<\/p>\n

\"Figure<\/a>

Figure 2: Transfer function of ADC and the first stage residue.<\/p><\/div>\n

Although digital calibration can mitigate many of these non-idealities, timing mismatch is a non-linear error that is more difficult to remove. At sampling rates up to 2Gs\/s, digital calibration would consume a large amount of power. An alternative solution uses a global switch running at the full sampling speed of the converter.\u00a0 Although this technique works reasonably well for medium-high speed ADC\u2019s [1<\/a>]<\/sup> [2<\/a>]<\/sup> , its effectiveness is limited by parasitic capacitance. We have developed a double-global sampling technique to remove the effect of parasitic capacitance on timing skew.\u00a0 At higher speeds the ability to turn the switch on and off at the full sampling rate becomes a major challenge. However, the use of scaled CMOS technology and gate-boosted switches still enables multi-GHz input bandwidth.<\/p>\n

Power optimization is a major design consideration when implementing a time-interleaved ADC.\u00a0 We will lower total power consumption by exploring innovative technologies for implementing the individual ADCs in the channel, such as the zero-crossing-based circuit (ZCBC) topologies previously presented.\u00a0 In particular, this work is investigating a fast, single-slope architecture (Figure 1). The primary emphasis is the development of high-speed, highly power efficient single-slope ZCBC architecture. Since the single slope architecture is more sensitive to non-idealities such as ramp nonlinearity, we have carefully studied the sources of non-idealities and developed techniques to address the accuracy issues.\u00a0 Figure 2 shows the preliminary results.\u00a0 The performance of the system is limited by digital noise coupling and non-linearity.<\/p>\n


\r\nReferences
  1. M. Gustavsson, \u201cA Global Passive Sampling Technique for High-Speed Switched-Capacitor Time-Interleaved ADCs,\u201d IEEE Trans. On Circuite and Systems II<\/em>, pp. 821-831, 2000. [↩<\/a>]<\/li>
  2. S. Gupta, et al, \u201cA 1GS\/s 11b Time-Interleaved ADC in 0.13um CMOS,\u201d Digest ISSCC 2006<\/em>, pp. 576-5771, 2006. [↩<\/a>]<\/li><\/ol><\/div>","protected":false},"excerpt":{"rendered":"

    With an increasing need for higher data rates, both wireless applications and data links are demanding higher speed analog-to-digital converters…<\/p>\n<\/div>","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[26],"tags":[4029,21,4028],"_links":{"self":[{"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/posts\/600"}],"collection":[{"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/comments?post=600"}],"version-history":[{"count":0,"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/posts\/600\/revisions"}],"wp:attachment":[{"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/media?parent=600"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/categories?post=600"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wpmu2.mit.local\/wp-json\/wp\/v2\/tags?post=600"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}